Aoc windows 10 driver

AOC Display / Monitor Drivers Download

After you upgrade your computer to Windows 10, if your AOC Display / Monitor Drivers are not working, you can fix the problem by updating the drivers. It is possible that your Display / Monitor driver is not compatible with the newer version of Windows.

driver-1619Sw.rar 6.3 KB 1,743 Free Download >> LM-500V Driver n/a LM-500V.zip 36.7 KB 22 Free Download >> LM500 Driver n/a LM500.zip 39.8 KB 26 Free Download >> LM725 Driver n/a LM725.zip 6.2 KB 164 Free Download >> TFT1980 Driver n/a TFT1980_197series_.zip 6.4 KB 143 Free Download >> 172V Driver n/a 172V_.zip 1.8 KB 28 Free Download >> 176S Driver n/a 176S.zip 1.8 KB 26 Free Download >> TFT1780 Driver n/a TFT1780_177_20Series_.zip 6.4 KB 371 Free Download >> LM765 Driver n/a LM765.zip 1.5 KB 169 Free Download >> LM520 Driver n/a LM520_LM520A.zip 5.5 KB 90 Free Download >> LM917 Driver n/a LM917.zip 6.2 KB 9 Free Download >> LM-510 Driver n/a LM-510.zip 36.8 KB 37 Free Download >>

More AOC Display / Monitor Downloads

How to Update Device Drivers

There are two ways to update drivers.

Option 1: Update drivers automatically

The Driver Update Utility for AOC devices is intelligent software which automatically recognizes your computer’s operating system and Display / Monitor model and finds the most up-to-date drivers for it. There is no risk of installing the wrong driver. The Driver Update Utility downloads and installs your drivers quickly and easily.

You can scan for driver updates automatically and install them manually with the free version of the Driver Update Utility for AOC, or complete all necessary driver updates automatically using the premium version.

Tech Tip: The Driver Update Utility for AOC will back up your current drivers for you. If you encounter any problems while updating your drivers, you can use this feature to restore your previous drivers and configuration settings.

Double-click on the program to run it. It will then scan your computer and identify any problem drivers. You will see a results page similar to the one below:

Click the Update button next to your driver. The correct version will be downloaded and installed automatically. Or, you can click the Update All button at the bottom to automatically download and install the correct version of all the drivers that are missing or out-of-date on your system.

Before updating, use the built-in driver backup feature to save your current drivers to a specified folder. Use this backup folder to safely restore drivers if necessary:

Option 2: Update drivers manually

To find the latest driver, including Windows 10 drivers, choose from our list of most popular AOC Display / Monitor downloads or search our driver archive for the driver that fits your specific Display / Monitor model and your PC’s operating system.

After downloading your driver update, you will need to install it. Driver updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow. Visit our Driver Support Page to watch helpful step-by-step videos on how to install drivers based on their file extension.

How to Install Drivers

After you have found the right driver, follow these simple instructions to install it.

Источник

AOC Drivers Download

The best way to fix your PC to run at peak performance is to update your drivers. If your system is slow, unresponsive or crashes often, the problem may be with your drivers. Sometimes, after upgrading to a newer operating system such as Windows 10, problems can occur because your current driver may only work with an older version of Windows. To download and update your drivers, follow the instructions below.

Recent Help Articles

driver-2217Pwc.rar 6.9 KB 631 Free Download >> 2243W Monitor Driver n/a AOC_2243W_Winx64_x86.zip 10.0 KB 20 Free Download >> 2343 Monitor Driver n/a AOC_2343_Winx64_x86.zip 10.0 KB 28 Free Download >> LM-510 Driver n/a LM-510.zip 36.8 KB 37 Free Download >> LM917 Driver n/a LM917.zip 6.2 KB 9 Free Download >> FT7x0_Series Driver FT7x0_Series.zip 6.1 KB 68 Free Download >> LM500 Driver n/a LM500.zip 39.8 KB 26 Free Download >> LM-500V Driver n/a LM-500V.zip 36.7 KB 22 Free Download >> LM725 Driver n/a LM725.zip 6.2 KB 164 Free Download >> TFT1980 Driver n/a TFT1980_197series_.zip 6.4 KB 143 Free Download >> 176S Driver n/a 176S.zip 1.8 KB 26 Free Download >> TFT1780 Driver n/a TFT1780_177_20Series_.zip 6.4 KB 371 Free Download >> LM765 Driver n/a LM765.zip 1.5 KB 169 Free Download >> lm2028 Driver n/a lm2028.rar 1.4 KB 32 Free Download >> LM917 Driver n/a LM925.zip 6.2 KB 49 Free Download >> 196v Driver n/a 196v.rar 1.4 KB 23 Free Download >>

More AOC Downloads

How to Update AOC Device Drivers Quickly & Easily

Tech Tip: Updating drivers manually requires some computer skills and patience. A faster and easier option is to use the Driver Update Utility for AOC to scan your system for free. The utility tells you which specific drivers are out-of-date for all of your devices.

Читайте также:  Fear тормозит на windows 10

To get the latest driver, including Windows 10 drivers, you can choose from the above list of most popular AOC downloads. Click the download button next to the matching model name. After you complete your download, move on to Step 2.

If your driver is not listed and you know the model name or number of your AOC device, you can use it to search our driver archive for your AOC device model. Simply type the model name and/or number into the search box and click the Search button. You may see different versions in the results. Choose the best match for your PC and operating system.

If you don’t know the model name or number, you can start to narrow your search down by choosing which category of AOC device you have (such as Printer, Scanner, Video, Network, etc.). Start by selecting the correct category from our list of AOC Device Drivers by Category above.

We employ a team from around the world. They add hundreds of new drivers to our site every day.

Once you download your new driver, then you need to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.

How to Open Device Manager

In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager

How to Install drivers using Device Manager

Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.

Select the Driver tab.

Click the Update Driver button and follow the instructions.

In most cases, you will need to reboot your computer in order for the driver update to take effect.

Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.

If you are having trouble installing your driver, you should use the Driver Update Utility for AOC. It is a software utility that automatically finds, downloads and installs the right driver for your system. You can even backup your drivers before making any changes, and revert back in case there were any problems. You can safely update all of your drivers in just a few clicks. Once you download and run the utility, it will scan for out-of-date or missing drivers:

When the scan is complete, the driver update utility will display a results page showing which drivers are missing or out-of-date. You can update individual drivers, or all of the necessary drivers with one click.

For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.

Источник

C24G1

Документация

Product Manual

Техническая поддержка и гарантия

Contact Support

All AOC displays are designed to be easy to use and install, and are manufactured to deliver the highest standards of performance. If you are unable to resolve a problem with your monitor on your own, please call your local AOC Customer Service Hotline.

your local AOC Customer Service Hotline:

Гарантийная информация

Драйверы и программное обеспечение

Driver

E-Saver Driver

Screen+ Driver

I-Menu Driver

G-Menu Driver

Frequently asked questions

Adjust RGB color or select desired color temperature.

Adjust H-Position and V-Position or press hot-key (AUTO).

This indicates an internal failure inside the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.

Check to see that the computer is not on power-saving mode by pressing any key or moving the mouse. Then if there is still no display, this typically indicates that the monitor is not receiving a video signal from the video card in your computer. You should verify this by trying the monitor on a different working system, when you plug the monitor into the computer you should get a display…if the monitor still doesn’t show an image on the different system, this indicates an internal problem with the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.

Unfortunately our monitor doesn’t have any external control to adjust the focus of the monitor. Try to change to a different resolution or refresh rate or try adjusting the brightness or contrast, if this doesn’t help, this indicates an internal problem with the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.

These problems are caused by using an extension video cable or switch box. You need to plug the monitor’s video cable directly to the video card connector on the back of your computer to obtain the best picture quality from the monitor. Also make sure that all the pins of the monitor’s video cable are in good condition.

Move electrical devices that may cause electrical interference as far away from the monitor as possible. Also use the maximum refresh rate your monitor is capable of at the resolution your are using.

Check the pin connector of your monitor video cable, verify that there are no damaged or bent pins, if everything looks fine; then this would indicate a failure inside the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.

Change the refresh rate of your monitor

No. You should try to activate the Auto-Adjust feature. If this does not work, please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.

Make sure that the signal cable is properly connected to the monitor and is securely inserted into the video card in the back of the computer.

Make sure that none of the pins on the signal cable are bent or broken. (It’s normal for some of the pins to be missing).

Читайте также:  Korg usb midi driver windows 10

Make sure that your computer is turned on and working properly. Your monitor could be waiting for a signal from your computer.

Try turning on your computer and monitor in a different sequence.

If none of these suggestions help, please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.

Use the Windows Shut Down screen and activate the AUTO-ADJUST feature of your monitor. You can display the Windows Shut Down screen by pressing START & then Shut Down. After the monitor has performed AUTO-ADJUST, press CANCEL to return to your regular desktop. Refer to the monitor’s documentation for instructions on how to activate the Auto-Adjust feature.

AOC is offering a Pixel Policy based on the ISO 9241-307 Class 1. For more information, please refer to the User Manual under the ‘Pixel Policy’ section.

Make sure the monitor is set to run at its true or native resolution. You can adjust the resolution in the DISPLAY PROPERTIES located in the Control Panel.

This means the monitor is receiving either very high or low signals from the video card of the computer, you can bypass your computer settings by going to Safe Mode.

To prevent this from happening again, make sure that you don’t exceed the maximum resolution of your monitor. Please refer to the user’s manual of the monitor for maximum resolution allowed for your monitor.

Your computer may be in screen saver mode, it has instructed the monitor to go to power saving mode, or the the monitor’s video cable is not properly connected to the computer.

Another possible cause of this is a locked-up or in-operative computer since the computer is what supplies the monitor with all the display data or information. Move the mouse or press a key to de-activate the screen saver or power saving mode. Check the monitor’s video cable and make sure it is snugly connected to the computer.

To see if the computer is operating properly, press the CAPS LOCK key on the keyboard repeatedly while checking the CAPS LOCK light. If the light is not turning ON & OFF, the computer is non-functional. Contact your computer manufacturer for help.

In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. Check with your computer manufacturer. Also check the monitor’s video cable and make sure none of the pins are bent.

Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.

Press the Start button and highlight the “Settings” option.Select the “Control Panel” folder.

Double Click on the “Display” icon on the Control Panel.

Select the “Settings” tab under the “Display Properties” window.

Click on the “Advanced” button.

Click on the “Adapter” tab and you can check, or set the refresh rate from there.

Verify that the video card and monitor driver are properly installed. Please reference downloading driver information. Please contact the video card vendor for further help on configuring the video card. For the monitor driver, please visit our website driver page.

Since your video card is located inside your computer, you will have to contact your computer manufacturer for assistance.

You can contact our Technical Support Department for parts price and availability. Please visit www.aoc-europe.com and visit our support page for the correct contact details for your country.

You can find this on a small white sticker label on the back of the monitor.

If your Mac does not have a VGA, DVI, HDMI, Displayport port (monitor cable input), then you will need to use an adapter. You will have to contact the manufacturer of the adapter for the correct settings to use with your monitor.

You can use Windex® to clean the screen and 409® clean the outer casing of the monitor. Please use a «soft» non-fiberous cloth to clean the screen. Do not use any paper products to clean the screen.

Please visit www.aoc-europe.com and choose the ‘Wall-mount’ option in the monitor product search criteria’s.

This means the computer is sending an incompatible display mode to your monitor. Please check the user’s manual for supported display mode or input and configure your computer to those settings. The recommended setting for LCD panel is can be found in the user manual under ‘Setting Optimal Resolution’.

Windows NT doesn’t require a monitor driver. You need to install a video card driver instead. Please contact the pc or video card manufacturer for further help on driver configurations of your video card.

Click on the ‘Start’ button, point to ‘Settings’, and then click on ‘Control Panel’.

Double click on the ‘Display’ Icon.

Select the ‘Settings’ tab then click on ‘Advanced. ‘.

Select the ‘Monitor’ button, then click on ‘Change. ‘ button.

Select ‘Specify the location of the driver(Advanced)’ and click on the ‘Next’ button.

Select ‘Display a list of all the drivers in a specific location, so you can choose the driver you want’, then click on ‘Next’ and then click on ‘Have Disk. ‘.

Click on the ‘Browse. ‘ button, select the appropriate drive F: ( CD-ROM Drive) then click on the ‘OK’ button.

Click on the ‘OK’ button, select your monitor model and click on the ‘Next’ button.

Click on ‘Finish’ button then the ‘Close’ button.

Haga clic en el botón “Inicio”, señale “Configuración” y, a continuación, haga clic en “Panel de control”.

Haga doble clic en el icono “Pantalla”.

Seleccione la pestaña “Configuración” y, a continuación, haga clic en “Avanzado…”.

Seleccione el botón “Monitor” y, a continuación, haga clic en el botón “Cambiar…”.

Seleccione “Especifique la ubicación del controlador (Avanzado)” y haga clic en el botón “Siguiente”.

Seleccione “Mostrar una lista de todos los controladores en una ubicación específica para que pueda seleccionar el controlador que desea” y, a continuación, haga clic en “Siguiente” y luego en “Utilizar disco…”.

Читайте также:  Dance ejay windows 10

Haga clic en el botón “Examinar…”, seleccione la unidad correspondiente F: (unidad CD-ROM) y haga clic en el botón “Aceptar”.

Haga clic en el botón “Aceptar”, seleccione el modelo de monitor y haga clic en el botón “Siguiente”.

Haga clic en el botón “Finalizar” y luego en el botón “Cerrar”.

Click on the ‘Start’ button and then click on ‘Control Panel’. Select and click on the category „Appearance and Themes‟

Click on the ‘Display’ Item.

Select the ‘Settings’ tab then click on the ‘Advanced’ button.

Select ‘Monitor’ tab
— If the ‘Properties’ button is inactive, it means your monitor is properly configured. Please stop installation.
— If the ‘Properties’ button is active, click on ‘Properties’ button.

Click on the ‘Driver’ tab and then click on ‘Update Driver. ‘ button.

Select the ‘Install from a list or specific location [advanced]’ radio button and then click on the ‘Next’ button.

Select the ‘Don’t Search. I will choose the driver to install’ radio button. Then click on the ‘Next’ button.

Click on the ‘Have disk. ‘ button, then click on the ‘Browse. ‘ button and then select the appropriate drive F: (CD-ROM Drive).

Click on the ‘Open’ button, then click the ‘OK’ button.

Select your monitor model and click on the ‘Next’ button.
— If you can see the ‘has not passed Windows® Logo testing to verify its compatibility with Windows® XP’ message, please click on the ‘Continue Anyway’ button.

Click on the ‘Finish’ button then the ‘Close’ button.

Click on the ‘OK’ button and then the ‘OK’ button again to close the Display Properties dialog box.

Click «Start » and «Control Panel». Then, double-click on «Appearance and Personalization».

Click «Personalization» and then «Display Settings».

Click «Advanced Settings. «.

Click «Properties» in the «Monitor» tab. If the «Properties» button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is.
If the message «Windows needs. » is displayed, as shown in the figure below, click «Continue».

Click «Update Driver. » in the «Driver» tab.

Check the «Browse my computer for driver software» checkbox and click «Let me pick from a list of device drivers on my computer».

Click on the ‘Have disk. ‘ button, then click on the ‘Browse. ‘ button and then select the appropriate drive F:\Driver (CD-ROM Drive).
Select your monitor model and click on the ‘Next’ button.

Click «Close» → «Close» → «OK» → «OK» on the following screens displayed in sequence.

Click on the ‘Start’ button and then click on ‘Control Panel’.

Click on the ‘Display’ icon.

Click on the “Change display settings” button.

Click the “Advanced Settings” button.

Click the “Monitor” tab and then click the “Properties” button.

Click the “Driver” tab.

Open the «Update Driver Software-Generic PnP Monitor» window by clicking on “Update Driver. “and then click the «Browse my computer for driver software» button.

Select «Let me pick from a list of device drivers on my computer».

Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive.

Close all open windows and remove the CD.

Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Haga clic con el botón derecho y haga clic en “Todas las aplicaciones” en la parte inferior derecha de la pantalla.

Haga clic en el icono “Panel de control”.
Configure la opción “Ver por” como “Iconos grandes” o “Iconos pequeños”.

Haga clic en el icono “Pantalla”.

Haga clic en el botón “Cambiar la configuración de pantalla”.

Haga clic en el botón “Configuración avanzada”.

Haga clic en la pestaña “Monitor” y, a continuación, haga clic en el botón “Propiedades”.

Haga clic en la pestaña “Controlador”.

Abra la ventana “Actualizar software de controlador-Monitor PnP genérico” haciendo clic en “Actualizar controlador…” y, a continuación, haga clic en el botón “Buscar software de controlador en el equipo”.

Seleccione “Elegir en una lista de controladores de dispositivo en el equipo”.

Haga clic en el botón “Utilizar disco”. Haga clic en el botón “Examinar” y vaya al directorio siguiente: X:\Driver\nombre del módulo (donde X es la letra del controlador que designa la unidad CD-ROM).

Seleccione el archivo “xxx.inf” y haga clic en el botón “Abrir”. Haga clic en el botón “Aceptar”.

Seleccione el modelo de su monitor y haga clic en el botón “Siguiente”.

Los archivos se copiarán desde el CD en su unidad de disco duro.

Cierre todas las ventanas abiertas y extraiga el CD.

Reinicie el sistema. El sistema seleccionará automáticamente la frecuencia de actualización máxima y los perfiles de coincidencia de color correspondientes.

Your monitor is Plug and Play with the Mac OS operating system. If you do find any issues during installation, please contact Mac’s technical support.

Click on the ‘Start’ button, point to ‘Settings’, and then click on ‘Control Panel’.

Double click on the ‘Display’ Icon.

Double click on the ‘Display’ Icon.

Select the ‘Settings’ tab then click on ‘Advanced. ‘.

Select ‘Monitor’
— If the ‘Properties’ button is inactive, it means your monitor is properly configured. Please stop installation.
— If the ‘Properties’ button is active. Click on ‘Properties’ button.

Click on ‘Driver’ and then click on ‘Update Driver. ‘ then click on the ‘Next’ button.

Select ‘Display a list of the known drivers for this device so that I can choose a specific driver’, then click on ‘Next’ and then click on ‘Have disk. ‘.

Click on the ‘Browse. ‘ button then select the appropriate drive F: ( CD-ROM Drive).

Click on the ‘Open’ button, then click the ‘OK’ button.

Select your monitor model and click on the ‘Next’ button.

If you can see the ‘Digital Signature Not Found’ window, click on the ‘Yes’ button.

Источник

Поделиться с друзьями
Советы экспертов и специалистов
Adblock
detector