Argox 203dt драйвер windows 10

Seagull Argox OS-203DT PPLA Driver Download (Official)

Supported Models

Argox OS-203DT PPLA Driver


Supported Operating Systems

Windows Vista, Windows Vista (64 bit), Windows 2003, Windows 2003 (64 bit), Windows XP, Windows XP (64 bit), Windows 2000

File Name


Uploader Notes

Argox OS-203DT PPLA

Printer Driver File

Uploaded By

Malathy (DG Staff Member) on 16-Apr-2007

Recent Help Articles

DriverEasy_Setup.exe 5.2 MB 196,428 Free Download >> Argox OS-203DT PPLA Driver n/a Argox_7.1.3.exe 11.7 MB 21 Free Download >> Argox OS-203DT PPLA Driver n/a Argox_7.1.4.exe 11.8 MB 28 Free Download >> Argox OS-203DT PPLA Driver n/a Argox_7.1.5.exe 11.9 MB 7 Free Download >> Argox OS-203DT PPLA Driver n/a Argox_7.1.6.exe 11.5 MB 43 Free Download >> Argox OS-203DT PPLB Driver n/a Argox_7.1.1.exe 10.3 MB 21 Free Download >> Argox OS-203DT PPLB Driver n/a Argox_7.1.4.exe 11.8 MB 38 Free Download >> Argox OS-203DT PPLB Driver n/a Argox_7.1.5.exe 11.9 MB 15 Free Download >> Meto OS-203DT PPLA Driver n/a Meto_7.1.6.exe 11.6 MB 12 Free Download >> OS-203DT Driver n/a Argox_7.1.9_M-2.exe___ 12.7 MB 49 Free Download >> Seagull Argox OS 214 plus PPLA Driver

How to Update Argox OS-203DT PPLA Device Drivers Quickly & Easily

To get the Argox OS-203DT PPLA driver, click the green download button above. After you complete your download, move on to Step 2.

If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter Argox OS-203DT PPLA into the search box above and then submit. In the results, choose the best match for your PC and operating system.

Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for Argox OS-203DT PPLA. It is a software utility which automatically finds and downloads the right driver.

To find the newest driver, you may need to visit the Seagull website. Most major device manufacturers update their drivers regularly.

Once you have downloaded your new driver, you’ll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.

How to Open Device Manager

In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager

How to Install a driver from Device Manager

Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.

Select the Driver tab.

Click the Update Driver button and follow the instructions.

In most cases, you will need to reboot your computer in order for the driver update to take effect.

Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.

For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.


Argox printer drivers

Date: March 19, 2019

Driver INFO

Drivers package details
Latest version:
Release date:
March 19, 2019
Installation guides
Installation Guides:
Drivers tested on
Tested on:
Windows: 10, 8.1
Windows Server: 2019, 2016, 2012 R2

Supported printers

Release notes

Software latest release notes

Argox CP-3140 Zip has been renamed into CP-3140 PPLZ, CP-2140 Zip into CP-2140 PPLZ, A-2240 Zip into A-2240 PPLZ, OS-2140E Zip into OS-2140E PPLZ, OS-2140 Zip into OS-2140 PPLZ and Argox X-2000v Zip into X-2000v PPLZ.

Few Argox printer models are no more part of Argox NiceLabel driver distribution:
OS-2140D PPLA, OS-2140D PPLB, OS-2140D Zip, X-1000+, X-2000+, X-3000+, X-1000+ PPLB, X-2000+ PPLB, X-3000+ PPLB, X-2000 Zip

Added PnP ID’s for Argox models:
OS-214 Plus PPLA, OS-214 Plus PPLB, X-1000v PPLA, X-1000v PPLB, X-2000v PPLA, X-2000v PPLB

Fixed About dialog issue with garbage after name for printers with name >= 32 chars.

» character was not correctly encoded into QR code. This is corrected now.

PrnInst utility quits driver installation if user doesn’t trust the publisher.

On Windows 8 and Windows Server 2012 users were not able to change language settings. Now they can change language settings if they have administrative rights.

After leaving an edit field the values in it are now correctly checked according to their specified minimum/maximum values and displayed in correct format for the selected measurement unit.

Prevent occasional labeling software crash when loading labels created with NiceLabel drivers older than version 4.6.16.

All the drivers are now digitaly signed to allow installation on Windows 8.

Advanced Port monitor can now be added by using Windows Add New Port Type option.

Port monitor now reconnectes to printer after lost connection

Numeric GS1Databar barcode types no longer have data size requirements

German translation for Tear Off Distance was Abrißabstand, which was wrong. We corrected this translation to Abrisskante.

Driver update didn’t preserve settings for all installed printers. This is fixed now.

DPL Vector fonts (CG Times, CG Triumvirate) printed from other Windows applications and not from labeling software were positioned wrong. This is corrected now.

RTC is now supported inside EAN-128 barcode on EPL printers.

Printer error detailes were missing while printing. The status reporting issue was limited to NicePrintQueue, Enterprise Print Manager(EPM) and NiceLabel.

Pause printer command added in Batch printing actions

Rotation option on userinterface and QR and MicroQR barcode font rotation now work correctly

If user sets the RFID transponder offset in the printer setup, this could cause a problem with the printer because the offset causes, that much of the label does not get printed whenever the elements is sent after the RFID command. Everything that is send before the RFID command, prints fine. Now we have change the print stream, that RFID command is always the last of all elements. In this case there is no problems with the print getting cut off.

Updated EPC RFID commands.

PrnInst utility was updated so that long INF file structure is supported.

User is now able to change administrator settings without reopening driver properties dialog as an elevated user. A click on the shielded button and entering the credentials is all that is needed.

Build number is now part of version information in About dialog

The internal date/time fields could only be used with the internal fonts Datamax1 and Datamax2. When you used any other internal font (including CG Times), the internal date/time didn’t get printed. This is corrected now.

PrnInst can now be moved to any position (second monitor) and it will stay there. It will not jump back to its original position.

Following models added:
R-400 Plus PPLA, R-400 Plus PPLB, R-400 Plus Zip, X-1000v PPLA, X-1000v PPLB, X-2000v PPLA, X-2000v PPLB and X-2000v Zip

User can use RTC offset from labeling software but the driver will send just offset in minutes for TIME format and days offset for DATE format.
Hour/second/month/year offsets are ignored from the GUI.

Also barcodes now uses «SO2» command for first date/time offset and «SO32 command for the second and all further date/time offsets on the same label.

Barcodes in labeling software with prompted contents are not exported correctly to the printer.

Added support for custom printer name after silently installing a printer driver from command line (/INSTPRN; /INSTMULTPRN)

New setting Printer default. If set, then printer will not send some settings from Options and Advanced Setup tab. This feature is useful for printers with LCD display where user would like to set printer parameters (speed, darkness. ) manually.

When you click on the Help button in About dialog help is opened, but it is not linked to any page.

Changed default number for cutting to 1 label instead of 0.

Incorrect stream is sent to printer when encoding Rfid Gen2 tags

DLL files for user interface translation did not include version info data.

Labels transfered from different systems now retain their driver settings.


Читайте также:  Windows create file cmd windows
Поделиться с друзьями
Советы экспертов и специалистов
Release version Release description
Ver.: X-1000VL PPLB printer is 203 dpi and not 300 dpi. This is fixed now.
Ver.: Argox I4 PPLB and iX4 PPLB models are left, not right handed. This is corrected now.
Ver.: NiceLabel driver supports also Argox D2, D4, P4, O4, I4, ix4 Series printers in all three emulations (PPLA,PPLB,PPLZ). Also CP2140L and CP-2240 models are supported.
Ver.: AME-3230 PPLZ added to Argox printer driver distribution.
Ver.: For Zebra RP4T ZPL, RZ400, RZ600, R110Xi4 and ZE500R models the RFID tag specifications are changed back to driver version 5.1.11 because of compatibility issue in 5.1.13. Now the RFID tag data are not cleared if you update the old driver with latest one.
Ver.: Fixed issue with DNS IP resolution not working when printer network name is longer then 25 characters.
Ver.: Print command syntax had additional parameter in case of RFID encoding and using unlock option for «User data» tag field. This is fixed now.
Ver.: DD.MM.YY and DD.MM.YYYY (without space before year) are new printer RTC formats on DPL printers.
Ver.: Left position PPLB printers (X series) send now actual label width data to the printer and no more just maximum label width, which cause miss-positioning.
Ver.: Corrected print speed limitation for ZT400 printers. Maximum print speed for ZT410 203 dpi could be 14 «/s fast. 300dpi printers can print 10″/s while 600dpi can print 4″/s.
ZT400r and ZE500R printer support RFID encoding now.
Ver.: Below printer models are supporting Unicode (internal Swiss Unicode font)
TLP 2824 Plus (ZPL)
S4M-203dpi ZPL
S4M-300dpi ZPL
LP 2824 Plus (ZPL)

P4T (ZPL) does not support Unicode (internal Swiss Unicode font)

Ver.: New RTC format is supported (YYJJJ: year in two digits + julian date)
Ver.: Max print quantity set to 99999999
Ver.: «%» character has been replaced with «#» character on QR barcode. This is eliminated now and % is printed OK withour any replacement.
Ver.: When printing the driver sends too wide graphic (in case the graphic element is all over label width) and in this case the printout is partly missing. This issue was solved with different optimization algorithm.
Ver.: Printer Install Wizard supports silent installation of Port Monitor modules.
Ver.: New languages supported are: Danish, Hebrew, Slovak and Portuguese (Brazil). Portuguese language is removed.
Ver.: Language monitor will now retry sending data to printer 3 times before reporting an error to spooler.
Ver.: Driver settings are now correctly updated after being imported.
Ver.: F1 printer did not print on correct position if label width was smaller than maximum print width. This is corrected now.
Ver.: PrnInst didn’t not work on folders with long path name. Current version support paths up to 260 ( MAX_PATH ) characters.
Ver.: Argox PPLB printers did not print as center printer. PPLB printer needs to send maximum print width with q command and not just actual label width. This is corrected now.
Ver.: Help file was updated with a note that some applications can lock the driver and prevent it from being updated by a new version.
Ver.: Microsoft Access was reporting wrong paper names when custom stocks are defined in driver. Now it works OK.
Ver.: 5.1.01 4402 Add a line stating the requirements needed for asian fonts to be printed correctly by the driver.
Ver.: Cutter functionality corrected for printing from Windows applications and cutter set to cut every n labels.
Ver.: Internal counter now works also when using stored layout on the printer. («store & recall» or «export to printer» options in labeling software)
Ver.: Solved problem with multi-thread printing (sometimes the stream is not correct).
Ver.: QR barcode is supported on DPL printers.
Prefix and suffix enabled for counters.
Ver.: Date offset is now supported on RTC for DPL printers. Offset is set in days.
The limitation is one RTC variable with offset on the label.
Offset does not work with time variable because of printer firmware limitation.
Ver.: Driver help for barcode font «y dimension» updated.
Ver.: In some rare cases driver crashed when printing a Code128 barcode. This is corrected now.
Ver.: Fixed occasional Spooler crash when printing Word document with very long filename.
Ver.: User can now manual encode the Code128 when doing export to printer or general export with ZPL models.
For this feature also NL must be updated (build after July 10th 2012).
Ver.: When doing Export to SAP from labeling software the line with variable definition should not be present, like it is when doing Export to printer.
This is corrected now.
Ver.: Maximum expansion for Code128 on ZPL printers is set to 20
Ver.: Following printers added to Argox distribution: CP-2140 PPLA, CP-2140 PPLB, CP-2140 Zip, CP-2140E PPLA, CP-2140E PPLB, CP-3140 PPLA, CP-3140 PPLB, CP-3140 Zip, CP-3140E PPLA and CP-3140E PPLB
Ver.: Date and time fileds are supported in GS1 barcode on ZPL printers. New date formats were added.
Ver.: Operation mode now supports a new option called «Stream».
Ver.: In some case of printing big graphics (color on 64-bit OS for example) the graphic elements could be missing. This is corrected now.
Ver.: Obsolete monitor.inf files were removed from drivers that still had them
Ver.: Removed warning message for special ports, when installing printer driver with Printer Installation Wizard.

If connected to standard Windows TCP/IP port then show warning message.

Ver.: Error message shows when doing Export to RedPrairie or General Export and on the label UPC or Postnet barcode was used.
Ver.: Advanced TCP/IP port monitor now supports connections to names as well as IP addresses.
Ver.: UPC-A is sent without check digit to the ZPL printer, because printer add the check digit by itself.
UPC-E has been already work in this way. The reason is that old ZPL printers take the last 11 digits for data and not first 11 digit (of 12) for data.
Ver.: Spooler crash when changing printer port while printing was fixed.
Ver.: Custom settings for unprintable now work correctly
Ver.: Printer ports are now properly shown in Options dialog.
Ver.: Changed font for Chinese Windows to SimHei.
Ver.: User is now able to select the option for internal RTC which allows printer to use the time read from RTC when the label is printed and not use the time of first label. The option could be found on «Advanced Setup > Other» dialog.
Ver.: In old driver peel and dispense option didn’t work if label present sensor check box wasn’t checked. This is corrected now. If user selects peel or dispense, label present sensor check box is automatically checked.
Ver.: Czech, Lithuanian and Ukrainian languages are now supported also in all NiceDrivers.

Ver.: 4.6.51 Wrong command is used for locking RFID tag.
Ver.: When printing from standard Windows application (like Microsoft Word) and using page rotation (Landscape and/or rotate 180), positions of graphic were shifted relative to internal elements.
Shift size depends on page dimensions, shift direction depends on rotation.
Ver.: When trying to preinstall drivers on Windows 7, user got an «Environment incorrect» error message. This is corrected now.
Ver.: Cut on last element is available only if no sensor is selected.
Ver.: If user selected batch cut (cut at the end) the printout was not OK. This has been corrected and it looks the command for cycle cutter did not work correctly: Because of that it has been removed.
Ver.: Added Aztec and GS1 Datamatrix barcodes. GS1 Datamatrix barcode works from NiceLabel version greater than 5.2.2865. Please check also your printer’s firmware version if support these barcodes.
Ver.: Memory slots correction for P4T and RP4T. Only Flash RAM is available from now on.
Ver.: Cancel before print option added to ZPL printers. Command cancels all format commands in the buffer. It also cancels any batches that are printing.
Ver.: 4.6.43 Following models added: F1 PPLB, OS-2140 PPLA, OS-2140 PPLB, OS-2140 Zip, OS-2140D PPLA, OS-2140D PPLB, OS-2140D Zip, OS-2140E PPLA, OS-2140E PPLB, OS-2140E Zip, A-2240 PPLA, A-2240 PPLB, A-2240 Zip, A-2240E PPLA, A-2240E PPLB, A-2240E Zip, A-3140 PPLA, A-3140 PPLB, X-3200 PPLA and X-3200 PPLB.
Ver.: Fixed occasional driver crash when printing extremely large graphics
Ver.: Page preview icons in «Advanced Dialog» corrected.
Ver.: Uninstall of printer with Printer Install Wizard did not work on Windows 2003 (x64) system
Ver.: Time format hh:mm:ss is not supported.
Ver.: All 1D barcodes on EPL printer do not have limitation for maximum height set to 600dots anymore. Limitation is now set to 1200 dots.
Ver.: Media Type selection enabled on printers without display and disabled on printers with display.
Ver.: 4.6.22
Ver.: 4.6.14 DPL printers have ability to print inverse text. This option is supported now also in NiceDrivers.
Ver.: 4.6.14 Macros 05 and 06 on Datamatrix are now supported on printer models with ZPL and DPL printer language.
Ver.: 4.6.14 DPL printer will print unlimited labels quantity with quantity command of 9999.
Ver.: 4.6.07 When exporting Code128 to the printer and using variable, the ZPL code use optimization build in the printer’s firmware for optimized Code128 encoding.
Ver.: 4.6.05 Driver sends «(00)+Data» instead of just «00+Data» for SSCC barcode for correct encoding on ZPL printers.
Ver.: 4.6.04 Printing internal Maxicode and PDF-417 now works.
Ver.: 4.6.04
Ver.: 4.6.04 WYSIWYG for internal fonts is corrected for DPL printers.
Ver.: 4.6.03 EPL printers can use option «KDU Repeat Prompt» when exporting label format to printer memory and using recall with KDU keyboard. With this option enabled, user will have to enter variable value on KDU keyborard on every recall. Option can be found on Advanced setup > Miscellaneous dialog.
Ver.: 4.6.02 PDF417 barcode height maximum limitation is 99 and not just 24.
Ver.: 4.6.01 Postnet barcodes has wrong expansions and are printed too big. This is corrected now and WYSIWYG is OK.
Ver.: 4.6.01 Added Rotation to parsed text in command fonts
Ver.: 4.6.00 Printing process was stopped during heavy duty printing.
Ver.: 4.6.00 Barcode height is corrected for non-203 dpi printers.
Ver.: 4.5.42 Driver print speed optimization
Ver.: 4.5.39 PrnInst showed login window, even if the user running the application was administrator.
Ver.: 4.5.37
Ver.: 4.5.34 Postnet barcode fonts can no longer have their width changed.
Ver.: 4.5.33
Ver.: 4.5.32 Graphic symbol font (GS) is supported now on ZPL printers.
User can print Registered Trade Mark, CopyRight, Trade Mark, Underwriters Laboratories approval and Canadian Standards Association approval symbols with typing A,B,C,D or E for internal text.
Ver.: 4.5.30 EPL printers sent cut offset in all cases (c commands). This is corrected now.
Ver.: 4.5.14
Ver.: 4.5.13 Datamatrix barcode can get negative coordinate in print stream, and also the size and WYSIWYG is not ok. This is corrected now.
Ver.: 4.5.12 User can select Automatic or Manual options for Job removing using keyboard in Printer Install Wizard
Ver.: 4.5.12 Fixed labeling software crash when turning off «Use Advanced printer driver interface».
Ver.: 4.5.11 Printer Install Wizard uninstallation of driver doesn`t remove all of the files from the SYSTEM32\spool\drivers\w32x86\3\ folder.
Ver.: 4.5.10 UCC/EAN128 barcode now produces correct command on EPL printers.
Ver.: 4.5.10
Ver.: 4.5.09 Electonic Article Survailance was always disabled on Rfid printers
Ver.: 4.5.09 Fixed printing of Datamatrix and QR barcode font with more then 255 character data
Ver.: 4.5.09 Added automatic termination character for Maxicode barcode font data
Ver.: 4.5.07
Ver.: 4.5.06 Printer Installation Wizard will be able to automaticly remove all jobs when updating printer
Ver.: 4.5.05 Printer Install Wizard can start an application specified in the command line, after it closes.
Ver.: 4.5.04 ZPL printers now use absolute darkness escape (

New setting Printer default. If set, then printer will not send some settings from Options and Advanced Setup tab. This feature is useful for printers with LCD display where user would like to set printer parameters (speed, darkness. ) manually.

Ver.: 4.5.00 — write MMF to alternative location (research)
— update MemMaster to store files to this location
— update driver to read from new location (make sure that the update will be backward compatible)
Ver.: 4.5.00 Support for new OS-214 plus printer.
Ver.: 4.5.00
Ver.: 4.4.69 Help on About dialog opens help page with contents ‘This program cannot display the webpage’.
Ver.: 4.4.69 Internal elements with Date/Time offsets in labelling application now print correctly. The problems occured on ZPL printers (applicators).
Ver.: 4.4.67
Ver.: 4.4.66 There is possible in ZPL to print counter without leading zeros. This can be done with NL communication because this setting should driver get from NL.

EPL printers support now also day offset for internal printer clock.
It is possible to use internal date & time also on barcode element from now on.

Removed Help button as no help is available.

Ver.: 4.4.64 Export to printer didn’t work properly. There was a wrong slot number in the exported print stream.
Ver.: 4.4.64 New Japanese translation for Printer Install Wizard
Ver.: 4.4.63 Downloaded fonts allways print in the same size, even if you resize them.
Ver.: 4.4.63 DL of graphics on LPT port doesnt work correctly, when printing you get an empty screen
Ver.: 4.4.63 When user starts Printer Install Wizard the application is shown but without focus
Ver.: 4.4.63
Ver.: 4.4.62 Corrected Print mode setting command for export
Ver.: 4.4.61 Rfid Read and Print is not working correct. When printing a barcode with values stored in the rfid tag, only a couple of «?» characters are printed.
Ver.: 4.4.60 Changed file info for Printer Install Wizard
Ver.: 4.4.60 Default value for Always use default settings is not correct when instaling it the driver with a configuration file attached.
Ver.: 4.4.55
Ver.: 4.4.53 Read and Store functionality is not enabled on Rfid printers
Ver.: 4.4.52