Facetracknoir не запускается windows 10

Known Issues of v200/v201:

The User Interface looks weird, when using a high-DPI monitor (4k)

This problem occurs with «classic Windows Applications», which do not support high DPI-monitors themselves. In April 2018 Microsoft has released a W10 Update, in which this Compatibility issue is patched. To make FaceTrackNoIR look good again:

Remark: this setting is saved in the Registry, so you have to set it only once.

The 64-bit version of IL2: Battle of Stalingrad does not respond to FaceTrackNoIR

It seems that the developers of BoS have made a little mistake there, which you can fix manually:

Remark: if you want to use another game with FaceTrackNoIR, you probably have to reverse the renaming process.

UDP-tracker: portnumber cannot be entered below 5550 and Yaw, Pitch and Roll are only enabled, when X it too.

The header actually says it all:

These issues were solved. You can download the fixed DLL from www.facetracknoir.nl.

Besides the fix, the UI for the UDP-tracker was upgraded, so more info is available for the user.

The Steam version of FSX does not respond to FaceTrackNoIR

Apparently the FSX Steam edition does not automatically install the legacy SimConnect interface. The solution is to install it manually:

Dummy TrackIR.exe not starting, when there is a space in the installation-path

A (dummy) process called TrackIR.exe is required by some programs (like EZCA) to enable headtracking. This process is not starting, when there is a space in the installation-path. To fix this problem either:

faceAPI tracker grabs focus, other windows become irresponsive:

The problem is caused by the video-widget, which grabs focus when the tracker starts and the checkbox «show videowidget» is unchecked.

Make sure to check the checkbox, before starting the tracker.

FaceTrackNoIR does not start on (some) PC’s with an ATI Graphics processor (due to incompatible OpenGL)

santobr posted this about this problem (it kinda accurately describes the problem):

If you have an ATI GPU, you know that ATI driver’s team doesn’t like standards, they have their own OpenGL without any standard.
So, if your FaceTrackNoIR loads and then quits without any error, just put the file atioglxx.dll inside the main folder of FaceTrackNoIR.
Yes, yes, just like IL-2, unfortunately. This is not FaceTrackNoIR’s fault, it is ATI driver’s team’s fault. There are things that only ATI does for you.

The only thing is that the dll file can be from Catalyst 11.5 or 11.4, because here everybody knows about the same problem with IL-2. These Catalyst’s versions were the only versions that were full compatible with the OpenGL standard.

Источник

Known Issues of v200/v201:

The User Interface looks weird, when using a high-DPI monitor (4k)

This problem occurs with «classic Windows Applications», which do not support high DPI-monitors themselves. In April 2018 Microsoft has released a W10 Update, in which this Compatibility issue is patched. To make FaceTrackNoIR look good again:

Remark: this setting is saved in the Registry, so you have to set it only once.

The 64-bit version of IL2: Battle of Stalingrad does not respond to FaceTrackNoIR

It seems that the developers of BoS have made a little mistake there, which you can fix manually:

Remark: if you want to use another game with FaceTrackNoIR, you probably have to reverse the renaming process.

UDP-tracker: portnumber cannot be entered below 5550 and Yaw, Pitch and Roll are only enabled, when X it too.

The header actually says it all:

These issues were solved. You can download the fixed DLL from www.facetracknoir.nl.

Besides the fix, the UI for the UDP-tracker was upgraded, so more info is available for the user.

The Steam version of FSX does not respond to FaceTrackNoIR

Apparently the FSX Steam edition does not automatically install the legacy SimConnect interface. The solution is to install it manually:

Dummy TrackIR.exe not starting, when there is a space in the installation-path

A (dummy) process called TrackIR.exe is required by some programs (like EZCA) to enable headtracking. This process is not starting, when there is a space in the installation-path. To fix this problem either:

faceAPI tracker grabs focus, other windows become irresponsive:

The problem is caused by the video-widget, which grabs focus when the tracker starts and the checkbox «show videowidget» is unchecked.

Make sure to check the checkbox, before starting the tracker.

FaceTrackNoIR does not start on (some) PC’s with an ATI Graphics processor (due to incompatible OpenGL)

santobr posted this about this problem (it kinda accurately describes the problem):

If you have an ATI GPU, you know that ATI driver’s team doesn’t like standards, they have their own OpenGL without any standard.
So, if your FaceTrackNoIR loads and then quits without any error, just put the file atioglxx.dll inside the main folder of FaceTrackNoIR.
Yes, yes, just like IL-2, unfortunately. This is not FaceTrackNoIR’s fault, it is ATI driver’s team’s fault. There are things that only ATI does for you.

The only thing is that the dll file can be from Catalyst 11.5 or 11.4, because here everybody knows about the same problem with IL-2. These Catalyst’s versions were the only versions that were full compatible with the OpenGL standard.

Источник

Known Issues (global):

Windows 7 (64-bit) issues:

The 32-bit version of FaceTrackNoIR can work in W7 64-bit: many users have reported this. However, some have also reported issues, which cause the program to function poorly. We don’t exactly know the cause, but there are some things to consider:

Some users experience un-ZIPping problems on W7. It may help to unZIP the update(s) to a new folder and then copy all files to the installation folder of FaceTrackNoIR.

«failed to register camera category: Unspecified error» (or «Failed to read friendly name: ERROR_FILE_NOT_FOUND»):

Very few users have reported this problem and recently we discovered that it is ‘codec’ related. Some users have solved the problem by un-installing one or more codec-packs, followed by re-installing the device-driver for their web-cam.

Sensenmann reported that he used the program Filmerit to remove some codec-errors. Mind you: using 3rd party software is always at your own risk. (some users have reported problems with Filmerit. )

Joda has recommended an alternative (with more recent release-date) namely: Codec Tweak Tool. If you have problems or success using this tool, please report it in the FaceTrackNoIR forum.

New CPU (i5 or i7) and APIScope error:

The previous version of FaceTrackNoIR (1.5) used an older version of faceAPI, which does not support some of the latest CPU’s available. This may cause the APIScope to fail.

This issue was solved in update 1.6, which can be downloaded from the downloads page. Please follow the directions concerning IPP-related errors.

IPP runtime related error(s):

If you experience a similar error like this, after starting FaceTrackNoIR:

or if you experience a ‘Waterfall’ error, the IPP-runtime library was not installed correctly.

The best way to fix this is:

Go to ‘Control Panel’/’Add remove software’ (or similar), locate IPP-runtime library and un-install it;

Download v160 from FaceTrackNoIR from the downloads page;

Start FaceTrackNoIR and start the Tracker. It should work now.

Optional: try the faceAPI demo. It uses the commercial version from faceAPI, which allows camera-selection.

Low fps:

There are a few problems that cause low framerates to occur.

Web-cam: SeeingMachines has provided a (small) trouble-shooting ‘guide’, which you can find on the left. In the web-cam section we also describe ways to improve web-cam performance.

CPU-load: SeeingMachines states that a ‘Dual core PC’ is required to operate faceAPI. We think that this is indeed true. Besides the CPU-load caused by faceAPI itself, games can have a profound influence on CPU-performance. The faster the PC, the better!

Short-keys do not work:

Users have reported, that it may be necessary to run FaceTrackNoIR as Administrator for the shortkeys to work on some systems. Since the shortkeys are configurable, you may have to find a combination that works. You may want to try configuring a US Standard 101 keyboard layout.

ArmA crashes on start-up:

This is a known problem, which also occurs with Free-track. The solution is to just start ArmA2 again: then it will run just fine.

Update: this problem was fixed in update v170.

Источник

Euro Truck Simulator 2 «FaceTrackNoIR Full v170»

Нажать кн. старт и когда увидим своё изображение в левой части программы запустить игру

Посмотреть:
на месте

Версия игы не имеет значения. Настройки ETS не переписывает. После удаления перенастраивать игру не понадобилось. Требует некоторого привыкания. Сама программа является свободной к распространению, вот ссылка на оф.сайт http://facetracknoir.sourceforge.net/home/default.htm А так же на файл ets2.ini (отдельно): https://disk.yandex.ua/public/?hash=O0QZoFcvUYmyuCuVr51VQiQQY3PYiVson0Em8NpUU%2Bk%3D

отличная штука, уже давно использую, правда привыкал долго

ух ты! давно были мысли чтоб в игре можно было башкой крутить, а тут вот что выложили!! у меня есть вопрос: как следить за картинкой на мониторе, если головой всё время нужно крутить?

Славян Григенча все очень просто: 1) поменять defoult.ini на ets.ini, предварительно поместив его в папку Settings в каталоге с установленным FaceTrackNoIR путь допустим C\Program Files\Abbequerque Inc\FaceTrackNoIR\

2) Нажать кн. старт и когда увидим своё изображение в левой части программы запустить игру (можно запустить сразу)

MrTazzzik Попробуй изменить освещение, должно помочь. в случае чего, я сброшу ссылку на предыдущую версию программы(функционала меньше, но стабильнее).

ZoLrevB7 а где ets2.ini

dkvfcsm Вот еще раз ссылка на ets2.ini http://disk.yandex.ua/public/?hash=O0QZoFcvUYmyuCuVr51VQiQQY3PYiVson0Em8NpUU%2Bk%3D

Ilgar84 Попробуй версию 1.6 вот ссылка http://yadi.sk/d/5hdNyPHU6m8QO

А где взять файл ets 2.ini? Ссылки не работают.

мою рожу почему-то не определяет, один раз определил и то на плече. подскажите как правильно сделать чтобы определил лицо?

ZoLrevB7 ты прав у меня лажа с освещением, и не получается никак о осветить нечем 🙁 Вещь конечно классная, но не в моём угловом положении.

всё пашет! спасибо, а можно как то уменьшить задержку? а то немного движения отстают

а есть видео как эту программу поставить

у меня не работает пробовал и 1.6 и 1.7

https://yadi.sk/i/yLZ9jQ9r3RBMYV Держите файл конфига ets2.ini

Ссылки на ets2.ini не рабочие. Нет бы вместе с программой в один архив закинуть.

Нашёл ets2.ini на каком-то левом сайте. Вроде рабочий. https://yadi.sk/i/Pks-mgHIud1tTA

у меня в проге не показывает изображение с камеры, кто может подсказать в чем проблема? версия 170 по инструкции со стима поставил

Для удобства мог бы порекомендовать связку FaceTrackNoIR (вывод в FaceTrackNoIR +OpenTrack (ввод UPD over network). В ОпенТрак регулируется каждое направление + можно переназначить движение по Х (головой вправо влево) на кручение головой Yaw. Получится, чтоб посмотреть вправо влево надо будет сместить голову в сторону (при это не отворачивая ее от монитора).. и тогда крутить головой можно хоть как, а не сидеть как прибитым к креслу, можно добавить вращение вверх вниз (хотя я в этом смысла не вижу, на ходу вертеть башкой чревато, а на стоянке разглядывать окрестности лучше с наружных камер) ) Остальные движения хоть и выглядят заманчиво, но по факту не особо нужны при виде из кабины.

Добавь видео я не пойму как настроитьZoLrevB7

Источник

facetracknoir

Headtracking program that makes gaming more fun.

Brought to you by: v4friend

Forums

FaceAPI Not Working

I have a problem that faceAPI ‘s setting

I installed FaceTracknoIR V2.01 and plugin-pack.

Start faceTrackNoIR and select Tracker Source to faceAPI.

After that, I open settings,Engine state is TERMINATED!

I think the API has error about camera,So I try headTrackingDemo.

If you try the Webcam Utility of FaceTrackNoiR, do you get video?
Maybe you can post a screenshot?

BTW, which headtracking demo are you referring to?

Ok,
I found my webcam (logcol c270) in Webcam Utility’s device list and I can see my face.

And i use headtrackingdemo from this page

OK, that’s fine.
Can you try the faceAPI executable named FTNoIR_FaceAPI_EXE.exe, which is in the faceAPI folder?

FTNoIR_FaceAPI_EXE.exe is in FaceTrackNoIR_v200\faceAPI.

And I execute the file,it’s just working.

That’s cool: you’re almost there then.

Maybe you should run FaceTrackNoIR «As Administrator»? The main program starts the same executable, but maybe there is some userrights issue.

I try run as administrator,but it’s not working

I found that FTNoIR_FaceAPI_EXE.exe is not working (output «Command 0,». and after that it’s stop.) from after open setting window to finish FaceTrackNoIR

I have excatly the same problem, how did you fix it?
Camera (logitech C615) is working fine
FaceTracknoIR V2.01 and plugin-pack.
Start faceTrackNoIR and select Tracker Source to faceAPI.
After that, I open settings,Engine state is TERMINATED or sometimes IDLE
FTNoIR_FaceAPI_EXE.exe is not working (output «Command 0,». and after that it’s stop.)
Sometime it start and i see my face but nothing happens in the facetracknoir app
please help

Do you start FaceTrackNoIR ‘as Administrator’? And does the webcam utility show video?

The state is IDLE, when the tracker is stopped.

Hi Wim,
thank you for your quick reply. Yes i’m running the program as admin.
And yes, webcam utility shows video, also i’ve been using the camera with other programs.
I was able to run the faceapi.exe one time today with no error and it showed my face but the facetracknoit still doesn’t allow me to do anything. (screenshoot)

I’m a bit confused. The faceAPI program seems to run fine. Does it even show yellow lines, when it detects you face?

I can see that FaceTrackNoIR is running, but you seem to have stopped the tracker on the main screen?

The faceAPI runs (sometimes, other times it crash saying Command; 0 or Command ; 20). when it runs and i see my face, it doesn’t detect anything (no yellow lines on my face)and I cannot do anything with the DOS windows (the one with the green text instructions, this window seems like frozen). I tried running it administrator or not and it doesn’t make any difference.

Facetracknoir is running (as admin) but in the faceAPI setting it says TERMINATED or IDLE no matter what I do. The stop, start and camera bottons don’t work.
Mattia

Can you try selecting the PointTracker tracker and press START in the main window? Just to test if you get video there.

Hi Wim, I unistalled everything, (webcam driver included) cleaned the register and reintalled everything from scratch and it looks like it’s working now. I relly don’t know what it was but thank ou anyway for your help!

Источник